Dual 12+12 L system, Stainless Steel frame (WxDxH) 3m x 1.5m h 1.9m.
Size and weight: The frame, the vessels and the piping is completly built with stainless steel, the total structure has got these sizes: Wide 3 m (9.8 feet), Height 1,9 m (6.2 feet), Deep 1,5 m (4.9 feet). The Weight of the machinery is 1800 kg (3970 pounds). For this features we recommend Room sizes of 6x5 m (19x16 feet) and Height of 4 m (13 feet).
Main Characteristics: This machine is certified with CE or UL Certified Enclosure, and these are some of the most important technical specifications: Voltage 460 AC-V or 400 AC-V, Frequency 60 Hz or 50 Hz, Installed Power 10 kW, Current 17,2 A.
Configurations: This machine is composed by two pumps, one for CO2 and another one for co-solvent, two extraction vessels, three separation vessels and separated chiller and heater. It can reach max pressure (Pmax) of 350 bar and max temperature (Tmax) of 85 °C. There are two pressure set-points: the first one is for extraction vessels, and the second one for separation vessels. There are 5 pressure gauges and voltage can be chosen on request.
Carbon dioxide is continually recycled with a close circuit for fluid recirculation. PLC on board, the system is connected with internet by an ethernet network connection, it's full automatic and it's equipped with touch screen and it's PED/CE or ASME/UL certified.
Pumps: There are two pumps, the most important is the CO2 pump, the carbon dioxide is the principal solvent for the extraction of apolar chemical compounds; and the secondary pump, which is used for the contemporary release in the process of polar or medium apolar co-solvents, useful for the extraction of chemical coumpounds with different degrees of polarity. At the condition of max pressure this pumps can ensure a CO2 Flow of 50 kg/h, and Co-solvent Flow of 5 L/h.
The extraction process is based on small variations of solvent's (CO2) pressure and temperature. These critical operations are ensured by some heater exchangers, filled by water which is heated or cooled by separated and external Chiller and Heater. Also these components have some technical specifications like:
Chiller: Voltage/Frequency 3 Ph 460/60 V/Hz or 400/50 V/Hz, Installed Power 3,7/5,9 kW/A, Size (WxHxD) 60x140x130 cm (2x4,5x4,2 feet).
Heater: Voltage/Frequency 3 Ph 460/60 V/Hz or 400/50 V/Hz, Installed Power 7,1/11,1 kW/A, Size (WxHxD) 30x55x75 cm (1x1,8x2,4 feet), Water connection in/out 1"x3,4" M.
Extractor volume 1 & 2: 12 L
Extraction basket volume 1 & 2: 10 L
Separator 1 volume: 3 L
Separators 2 & 3 volumes: 2 L
Accumulator volume: 27 L
ASME certified safety valve for each vessel in isolated tubing from vessel.
Low headroom hoist
Touch screen size 15 inch.
PLC microprocessor Intel i7
Compressed air pressure 100 Ψ
Compressed air flow 1 CFM/h
2 Back pressure automatic pilot valves
2 Automatic back pressure valves
There's also the option with only one extraction vessel with 12 L of volume and 10 L of basket volume.