+39 0121.334.097 Contact form

SCFN plate low Supercritical Fluid Specialist, partner of the Super Critical Fluid Network (SCFN)  

Particles from Gas Saturated Solutions

PGSS (Particles from Gas Saturated Solutions) is a technique for the production of microparticles of different materials of relatively low melting temperatures, such as polymers, waxes or fats. The process is based on the capacity of those materials to dissolve large amounts of CO2 at moderate pressures. Upon depressurization down to ambient conditions, the dissolved CO2 is rapidly released and expanded, producing an intense cooling effect that promotes the formation of microparticles.
 
PGSS
 
The PGSS process is quite similar to the RESS process with one important difference: in PGSS process, the polymer(s) are first melted or suspended in solvent at a given temperature in an autoclave and then solubilizing SCF-CO2 in above melted or liquid suspended substance(s), leading to a so called gas saturated solution or suspension that is further depressurized through a nozzle with the formation of droplets or solid particles.
Unlike to RESS technique, the principle governing PGSS process involves both the pressure and temperature and solvent-induced phase separation. This technique avoids the low solubility in SC-CO2 of many molecules of pharmaceutical interest such as proteins and peptides that would be too difficult to treat with RESS.
Advantages of PGSS process are:
  • substance need not be soluble in SCF-CO2,
  • simplicity of this process, leading to low processing cost and wide range of application,
  • can be used with suspensions of active ingredient(s) in polymer(s) or other carrier substance leading to composite particles,
  • can be applied to process inorganic powders to pharmaceutical compounds,
  • low solvent gas usage and pressure than RESS process as operational condition.

Contact form

If you have any question, please contact us.

Please, enter your name
Please, enter your phone number
Please, enter your e-mail address Mail address is not not valid
Please, enter your message

Address

  Separeco Srl
  Via Carlo Borra 33/35,                                  PINEROLO, ITALY
  +39 0121 339 047
  info@separeco.com
  Mo-Fr:10.00 18.00