Standard Platforms & Custom Engineering
Two routes, One guarantee
Two thirds of our clients run a standard platform. One third needs a system that does not exist yet.
What decides is the material, not the budget.
Most supercritical CO2 applications fall inside a well-mapped space. The pressures are known, the vessel sizes are known, the cycle logic is known, and the engineering has already been done and validated in production. A standard platform delivers that work as a product. Outside that space, an unusual matrix, a capacity nobody builds, a process step with no precedent, the engineering starts from the beginning. That is custom.
Standard Platforms
Proven systems for the most common extraction and processing needs. Reliable performance, faster delivery, tested know-how.
A standard platform is defined on two axes. The configuration sets how many extraction chambers the system has, and each number generates a different process.
Configuration Process: What it solves
Single SEP – Single Extractor Process The reference case: one chamber, one cycle
Double SCP – Semi-Continuous Process One vessel loads while the other extracts; dead time removed
Triple COP – Continuous Overlapping Process Cycles overlap; the system never idle
Quadruple ECOP – Extended Continuous Overlapping Process Long cycles on slow matrices, daily output intact
The options are not accessories. Each one adds hardware that makes a process possible, not a feature that makes it nicer.
Option Process: What it adds
SES – Step Extraction Sequence Extractor pressure stepped across the cycle: several extracts from one charge instead of one
ESE – Enhanced Solvent Extraction A second high-pressure pump for water or co-solvent, at the same pressure as the CO2, polar compounds come within reach
SSP – Supercritical Separation Process Separators rated and controlled above the critical point: the extract is split into fractions as it moves down the pressure cascade
Every combination on this grid is engineering that is already complete: vessel design, pressure ratings, separator train, control logic and safety architecture are specified, built and running in production sites. What you gain is time and certainty, a shorter delivery, a known throughput figure, and an operating protocol written from systems that have already run.
The route when your process fits a shape we have already proven.
Custom Engineering
Fully engineered systems for unique matrices, capacities or process specifications. Built with you, optimized for your job.
The starting point is your material and your production plan, not a grid. Vessel volume, number of chambers, separator conditions, cycle strategy and solvent scheme are all open variables, and so is the plant layout the system has to fit into.
The engineering is done with you. Your requirements become a User Requirement Specification, and the specification becomes the design basis for every component, every interlock and every document that follows. What you gain is fit: a system built around a process that has no standard answer, sized to a throughput no platform covers.
The route when the system you need does not exist yet.
What does not change
Both routes are built to the same engineering standards, with the same component suppliers, the same code compliance, PED or ASME VIII Div. 1, and the same documentation set. Both are verified against the URS and signed off at Factory Acceptance Test. Both are handed over to operators we train ourselves: the know-how goes to your team, not into a licence.
How the choice is made
Not in a meeting. Your material runs in our pilot facility first, and the trial establishes solubility windows, cycle times, yields and separator cut points on the actual feedstock. Those numbers decide whether a standard platform meets the target or whether the process needs a system of its own. Either way, you see the data before you commit to hardware
